Aluminium Sheet 1050

Aluminium 1050 O Sheet Grade - Commercial Alloy

1050 aluminum sheet belongs to commercially pure wrought family with a purity of 99.5% Al. It also belongs to 1000 series aluminum alloy, which has better correction resistance than other alloy series. In the 1050 aluminum sheet, in addition to the component Al, 0.4% Fe is added, so 1050 aluminum alloy also has high conductivity. In general, 1050 aluminum sheet properties exhibit high plasticity, strong corrosion resistance, excellent electrical and thermal conductivity, but the strength of 1050 aluminum alloy is low. Here, Mingtai has 20 years of 1050 aluminum sheet production experience and is able to produce and supply high-quality 1050 aluminum sheet. In addition, different temper can be provided, such as O (annealed), H12, H14, H18 and so on.

Aluminium 1050 | 1050A H14

1050 Aluminum Plate Features:

1050 aluminum plate is very soft and has little strength, but it has good ductility. It can be pulled into filaments or rolled foil.

1050 aluminum plate has small density, can be strengthened, easy to process, and has good conductivity and thermal conductivity. Its conductivity is two-thirds of that of copper and its thermal conductivity is three times greater than that of iron. Therefore, it is mostly used in wires, cables, various heat exchangers, heat dissipation materials, etc.

1050 aluminum plate cannot be strengthened by heat treatment, but its strength can be improved by cold deformation.

Corrosion resistance, no low temperature brittleness, strong reflection, no magnetism, sound absorption, nuclear radiation resistance and beautiful appearance.

1050 Aluminum Sheet Available Sizes Information:

Thickness:	0.1-600mm
Width:	100-2650m
Length:	500-16000mm
Temper	F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114
Standard:	GB/T3880, GJB1541, GB/N167, JB2053, GJB2662, ASTM B209, ASME SB-209, EN 485, BS EN 573

1050 Aluminum Chemical Composition:

Chemical Composition Limits
Weight%	Si	Fe	Cu	Mn	Mg	Zn	Ti	Al	V	Others
1050A	0.25 max	0.40 max	0.05 max	0.05 max	0.05 max	0.07 max	0.05 max	99.5 min	-	0.03
1050	0.25 max	0.40 max	0.05 max	0.05 max	0.05 max	0.05 max	0.03 max	99.5 min	0.05	0.03

1050A H14 aluminum sheet

1050 Aluminum Mechanical Properties:

u Physical Properties:

The following table shows the physical properties of Aluminium / Aluminum 1050 .

Properties	Metric	Imperial
Density	2.6-2.8 g/cm3	0.09-0.101 lb/in3

u Mechanical Properties:

The mechanical properties of Aluminium / Aluminum 1050 are displayed in the following table.

Properties	Metric	Imperial
Elastic modulus	70-80 Gpa	10152-11603 ksi
Poisson's ratio	0.33	0.33

u Thermal Properties:

The thermal properties of Aluminium / Aluminum 1050 are given in the following table.

Properties		Conditions
Properties		T (ºC)	Treatment
Thermal conductivity	231 (W/mK)	25	O

Specifications:

    UNS A91050
    BS - 1B and 5L36
    Australia - A1050
    French - A5
    Germany - 3.0255 - Al99.5
    Italy - UNI 9001/2
    Spain - L-3051
    Sweden - 4007

1050 aluminum sheet is commonly used in some places that require high corrosion resistance and formability but not high strength. 1050 aluminum sheet is also industrial aluminum. For example, A typical application is the manufacture of chemical industry containers. In addition,1050 aluminum alloy is used for lithium battery soft connection, pole material, explosion-proof valve, PS board base, heat sink, signage, lamp, reflector, etc.