1060 Pure Aluminum Sheet Plate

1060 aluminum sheet contains 99.6% Al, which is also called pure aluminum sheet. Because the production process of 1060 aluminum sheet is relatively single, the technology is relatively mature, and the market price is very advantageous. It is often used in the industrial manufacture of large storage tanks. So, It’s also a commonly used industrial pure aluminum in the aluminum sheet family. Of course,1060 aluminum sheet has the characteristics of excellent electrical conductivity, thermal conductivity, plasticity, and extensibility of pure aluminum, but its own strength is low, it cannot be strengthened by heat treatment, and machinability is not good. Therefore,1060 aluminum sheet is also used in products with low requirements for strength. Such as face mask nose wire, billboards, nameplates, building exterior decoration, kitchen sinks, lamp holders, fan leaves, electronic parts, clock and disk surfaces, reflective appliances, etc.

1060 Aluminum Sheet Chemical Composition:

Alloy

Others:

Each

Others:

Total

Al: Min

1060

0.25

0.35

0.05

0.03

–

0.05

0.03

–

99.60

1060 Aluminium Sheet Mechanical Properties

Alloy Temper	Specified	Tensile strength	Yield strength	Elongation
Alloy Temper	Thickness(mm)	(MPa)	(MPa)	(%)
1060-O (annealed)	0.006-0.019	8.0-14.0	2.5	Min15
	0.020-0.050			Min22
	0.051-3.000			Min25
1060-H12/ 1060-H22	0.017-0.050	11.0-16.0	9.0	Min6
1060-H12/ 1060-H22	0.051-2.000	11.0-16.0	9.0	Min12
1060-H14/ 1060-H24	0.006-0.019	12.0-17.0	10.0	Min1
	0.020-0.050			Min5
	0.051-1.000			Min10
1060-H16/ 1060-H26	0.006-0.019	14.0-19.0	11.0	Min1
	0.020-0.050			Min4
	0.051-0.162			Min5
1060-H18/ 1060-H28	0.006-0.019	Min16.0	Min12.0	Min1
	0.020-0.050			Min3
	0.051-0.128			Min4
1060-H112	0.250-0.499	Min11.0	Min7.0	Min10
	0.500-1.000	Min10.0	Min5.0	Min20
	1.001-3.000	Min9.0	Min4.0	Min25

1060 Aluminum Sheet Features

1060 Aluminum Sheet Available Sizes Information:

Thickness:	0.1-600mm
Width:	100-2650m
Length:	500-16000mm
Temper:	F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114
Standard:	GB/T3880, GJB1541, GB/N167, JB2053, GJB2662, ASTM B209, ASME SB-209, EN 485, BS EN 573

1060 Aluminum Sheet Features:

Excellent Processability.1060 aluminum sheet has good elongation and tensile strength, high formability and strong plasticity, which can fully meet the general processing requirements (stamping, stretching).

Physical Characteristics.1060 aluminum sheet has excellent corrosion resistance, electrical conductivity and thermal conductivity. However, its strength is low, heat treatment cannot be performed, and machinability is not good.

Weldability.1060 aluminum sheet can be used for gas welding, hydrogen atom welding and contact welding, but it is not easy to braze.1060 aluminum sheet is easy to withstand various pressure processing, extension and bending.

1060 Aluminum Sheet Application:

Hot-rolled 1060 aluminum sheet uses: Face mask nose wire, soft battery connection, bus interior, auto parts, aluminum-plastic panel, signage, lamps, wide curtain wall, bus luggage rack / floor / pattern board, etc.

Hot rolled medium-thickness 1060 aluminum sheet uses: Aluminum bus bar, car radiator, new energy car charging pile, mold, etc.

Hot-rolled 1060-O aluminum sheet uses: Face mask nose wire, automobile heat shield, electronic tag, soft battery connector, the battery tabs materials.