3003 Aluminium Sheet Metal

3003 H14 Aluminum Sheet | South korea Gwangyang Aluminum

3003 aluminum sheet is a typical Al-Mn antirust alloy. The addition of the alloy component Mn increases the strength slightly while maintaining the excellent workability and corrosion resistance of pure aluminum. The 3003 aluminum sheet is a non-heat-treated alloy and cannot be strengthened by heat treatment, so the conventional cold working method can improve its mechanical properties. In addition, 3003 aluminum sheet has excellent weldability, formability and other advantages, and has become a popular and economical choice for "home appliance components". In addition to the commonly used specifications, Gwangyang Aluminum Copper can also produce 3003 ultra-wide and ultra-thick aluminum plates with internal stress relief and no deformation during cutting, and the width is 2650mm, the thickness is 500mm. So Gwangyang becomes one of the few manufacturers in China that can produce ultra-wide and ultra-thick aluminum plates. Aluminum Alloy 3003 is a commercially pure aluminum with the addition of manganese. Alloy 3003 is the most widely used aluminum alloy due to it's excellent characteristics. The addition of manganese increases the strength and Alloy 3003 is 20% stronger than alloy 1100 . As with alloy 1100, alloy 3003 has excellent corrosion resistance and workability. It is commonly used in chemical equipment, cooking and kitchen equipment, decorative trim and storage tanks.

Gwangyang Aluminum 3003 Aluminum Sheet Features:

Corrosion Resistance. 3003 aluminum sheet has good corrosion resistance, which is close to the corrosion resistance of industrial pure aluminum. It can effectively resist the corrosion of atmosphere, fresh water, sea water, food, organic acids, gasoline, neutral inorganic salt solution, and dilute acids.

High Plasticity. In the annealed temper, the plasticity of the 3003 aluminum sheet is very high. In the case of semi-cold work hardening, its plasticity is still good, and its plasticity is low when it is cold worked. Good weldability and poor machinability.

Weak Resistance to Peeling Corrosion. In the cold deformed state, the 3003 aluminum sheet has a tendency to peel and corrode. The larger the deformation is, the more severe the peeling is. Because the color is not uniform after anodizing, anodizing is generally not performed.

3003 Aluminum Sheet Available Sizes Information- AMS 4006 O temper, AMS 4008 H14

3003 Aluminum Sheet Mechanical Properties: 

3003 Aluminum Sheet Application:

• Cooking utensils

• Builder's hardware

• Pressure vessels

• Ice cube trays

• Eyelet stock

• Awning slats

• Gas lines

• Garage doors

• Refrigerator panels

• Heat exchangers

• Gasoline tanks

• Storage tanks

• Drawn and spun parts