3005 metal aluminum alloy

Competitive Price - aluminum sheet supply 3005 aluminum alloy metal

3005 aluminum sheet belongs to 3 series Al-Mn alloy with Mn content between 1.0-1.5, and 3003, 3004 aluminum sheet belong to rust-proof alloy with strong corrosion resistance. Similarly, 3005 aluminum sheet is also a non-heat-treated alloy, which is cold-processed to improve its mechanical properties. However, the strength of 3005 aluminum is higher than both of them. Among them, it is about 20% stronger than 3003 aluminum sheet. In addition, the3005 aluminum sheet is also excellent in formability, solubility and anodic oxidation. Therefore, according to these 3005 aluminum properties, 3005 aluminum sheet can be widely used in air conditioning, refrigerator, car bottom, the ocean and other humid environment, but also often used in building materials, color aluminum sheet, etc.

3005 aluminum alloy metal

3005 Aluminum Sheet Features:

Excellent Corrosion Resistance.3005 aluminum sheet can resist corrosion from atmosphere, fresh water, sea water, food, organic acid, gasoline, neutral inorganic solution and so on.
Good Formability. 3005 aluminum sheet can exhibit excellent formability and meltability under normal temperature conditions.
High Plasticity. In annealing temper, 3005 aluminum sheet has high plasticity. In the case of semi-cold quenching, plasticity is good, while in the process of cold quenching, plasticity is the lowest.
Anodizing Property. 3005 aluminum sheetcan be easily anodized, and the surface after anodized is more conducive to color coating and other treatment in the later stage.
Mechanical Properties. The tensile strength of 3005 aluminum sheet is 140-180 MPa, and the yield strength is 0.2 (MPa) ≥115.

3005 Aluminum Sheet Chemical Composition:

Element	Content (%)
Aluminum, Al	95.7 - 98.8
Manganese, Mn	1- 1.5
Iron, Fe	≤ 0.70
Silicon, Si	≤ 0.60
Copper, Cu	≤ 0.30
Zinc, Zn	≤ 0.25
Magnesium, Mg	0.20 - 0.60
Chromium, Cr	≤ 0.10
Titanium, Ti	≤ 0.10
Other (each)	≤ 0.050
Other (total)	≤ 0.15

3005 Aluminum Sheet Mechanical Properties:

Properties	Metric	Imperial
Tensile strength	180 MPa	26100 psi
Yield strength	165 MPa	23900 psi
Elongation	7%	7%
Elastic modulus	69 GPa	10000 ksi
Shear strength	110 MPa	16000 psi
Hardness, Brinell (@load 500 kg; thickness 10.0 mm)	49	49

3005 Aluminum Sheet Available Sizes Information:

Thickness:	0.1-600mm
Width:	100-2650m
Length:	500-16000mm
Temper:	F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114 etc.
Standard:	GB/T3880, GJB1541, GB/N167, JB2053, GJB2662, ASTM B209, ASME SB-209, EN 485, BS EN 573