1070 Aluminum Cathode Sheet
1070 Aluminum Cathode is specially used for zinc electro-win
1070 Aluminium Sheets
- Design Standard
- 1070
- MOQ:
- 8-10 tons
- Delivery Time:
- 25-35 Days
- Trade Term:
- FOB, CIF, CFR
- Execution Standard:
- ASTM B209, EN AW, etc
1070 Aluminum Sheet Supplier - Gwangyang Aluminum
1070 aluminum sheet contains 99.7% Al, which is the alloy sheet with the highest Al content in the 1 series of industrial aluminum.Therefore,1070 aluminum alloy has retained the excellent properties of pure aluminum itself, such as elongation processing, thermal conductivity, corrosion resistance and so on.In addition, the mechanical properties of1070 aluminum sheet were slightly enhanced by the addition of a few alloying elements.Similarly, as a representative alloy sheet of industrial aluminum,1070 aluminum sheet price is low, high economy, which can be widely used in bus duct, wires, vacuum tube isolation nets, cable nets, wire cores, plane ventilation system parts and decorative parts, etc.
1070 Aluminum Sheet Features:
High Conductivity. 1070 aluminum sheet has a conductivity {20℃(68℉)(%IACS)} of up to 62 and is second only to copper, silver and gold in thermal conductivity and conductivity.
Light Weight. For the same volume,1070 aluminum sheet is lighter than steel, iron and copper.
Excellent Corrosion Resistance. Similarly, 1070 aluminum sheet has excellent resistance to atmospheric and water corrosion, as well as to most acids and organic compounds.
Other Features. In addition, 1070 aluminum sheet is a non-heat-treated alloy, which is cooled and processed to improve its strength. It has poor cutting performance, but it can accept contact welding and gas welding, etc. There are other 1070 aluminum properties corresponding applications, don’t hesitate to click online customer service, free consultation to get it!
1070 Aluminum Sheet Chemical Composition:
Element | Content (%) |
Aluminum, Al | ≥ 99.7 |
Iron, Fe | ≤ 0.25 |
Silicon, Si | ≤ 0.20 |
Zinc, Zn | ≤ 0.040 |
Vanadium, V | ≤ 0.050 |
Copper, Cu | ≤ 0.040 |
Titanium, Ti | ≤ 0.030 |
Magnesium, Mg | ≤ 0.030 |
Manganese, Mn | ≤ 0.030 |
Other (each) | ≤ 0.030 |
1070 Aluminum Sheet Available Sizes Information:
Thickness: | 0.1-600mm |
Width: | 100-2650m |
Length: | 500-16000mm |
Temper: | F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114 etc. |
Standard: | GB/T3880, GJB1541, GB/N167, JB2053, GJB2662, ASTM B209, ASME SB-209, EN 485, BS EN 573 |
1070 Aluminum Sheet Mechanical Properties:
u Physical Properties
The physical properties of aluminium/aluminum 1070 alloy are outlined in the following table.
Properties | Metric | Imperial |
Density | 2.70 g/cm3 | 0.0975 lb/in3 |
u Mechanical Properties
The mechanical properties of aluminium / aluminum 1070-O alloy are tabulated below.
Properties | Metric | Imperial |
Tensile strength | 95 MPa | 13778 psi |
1070 Aluminum Sheet Application:
General industrial components
Building and construction
Transport
Electrical material
PS plates
Strips for ornaments
Communication cables
Refrigerator and freezer cabinets
For joining two pieces of aluminium / aluminum.
1070 aluminum sheet from Gwangyang Aluminum
Gwangyang Aluminum produces 1070 sheet leveraging technology
1070 Aluminum Foil
1070 aluminum foil is of high plasticity, corrosion resistan
