Aluminum Sheet 5052 With Good Corrosion Resistance

5052 aluminum plate for the AL-Mg alloy aluminum plate, is the most widely used a rust-proof aluminum, the strength of this alloy is high, especially with anti-fatigue strength: plastic and high corrosion resistance, heat treatment can not be strengthened in the half Cold work hard plastic is still good, cold hardening when the plastic low, good corrosion resistance, good weldability, cutting performance can be poor, can be polished.

5052 aluminum used in the manufacture of aircraft and car fuel tanks, tubing, and traffic vehicles, ship's sheet metal parts, instruments, street lamps and rivets, metal products, electrical enclosures and so on.

Surface Quality

1, the surface does not allow cracks, corrosion spots and nitrate traces.

2, the surface allows the depth of not more than the location of the site of the nominal size of 8% of the nominal size of the skin, bubbles, surface rough and local mechanical damage, but the maximum depth of defects can not exceed 0.5mm, the total defect area does not exceed the total area of the board 5%.

3, allowing the supplier along the profile longitudinal lighting to the surface smooth.

4, other requirements: the demand side and the supplier to develop their own.

5052 aluminum plate and 1060 aluminum plate series difference

• Hardness: 1060 aluminum plate tensile strength between 110-130, while the 5052 series of tensile strength is between 210-230 that 5052 hardness will be 1060 high response 100%.

• Elongation: 1060 series of elongation of 5%, while the 5052 series of elongation reached 12-16%, it can be said that in the 5052 series than 1060 hard 100% of the case, the elongation also increased by 200 %about.

• Chemical properties: 1060 for the pure aluminum, 5052 for the aluminum alloy, in special circumstances 5052 corrosion better.