The Applications of 8x4 Aluminum Chequer Plate
The Application and Sale of Aluminum Checker Plate
1mm thick and 8x4 aluminum chequer plate is commonly employed in a range of settings, including cold storage facilities, bathrooms, as well as anti-skid work platforms and foot pedals.
The 2mm aluminum diamond plate, on the other hand, is frequently utilized as anti-skid aluminum plates on subway station floors and as anti-skid road partitions.
3 mm aluminum tread plate is frequently employed for creating anti-skid floors on trains, high-speed rails, ships, and bus floors.
4 mm aluminum diamond plate is commonly utilized in cold storage trucks, containers, and channel openings.
Some common pattern types in the thickness range of 0.3-1.0mm include orange peel pattern, hemispherical pattern, and pebble pattern. These patterns are widely used in thermal pipe insulation, decorative covers for electrical appliances and lamps, and refrigerators, among other applications.
Aluminum Tread Plate Inspection Report
Surface Quality Inspection
The surface of the aluminum checker plate is smooth and polished, without any visible color variations or oil stains. It is important to note that occasionally, dark spots may appear on the surface of aluminum plates. These spots are typically caused by friction and static electricity between patterned aluminum plates that are not separated by paper. Therefore, it is essential to take proper care of the surface during storage, transportation, and packaging of patterned aluminum plates to prevent any damage.
Thickness Measurement
The thickness of the aluminum tread plate is determined using an external diameter micrometer, which can be purchased as a digital micrometer. It is important to note that the error margin for this measurement device is within 0.05mm. When it comes to the pattern height of a 3mm thick aluminum sheet with a pattern size of 8x4, the acceptable range is between 0.6-1.4mm. Manufacturers typically aim for a pattern height of approximately 0.8-1.0mm to ensure optimal performance and durability.
Dimensional Analysis and Mechanical Properties Evaluation
During the dimensional inspection of patterned aluminum plates, we primarily measure their length, width, and diagonal dimensions. It is essential to ensure that these dimensions fall within the specified tolerances.
When it comes to the mechanical properties of patterned aluminum plates, it is important to note that their strength should not be excessively high. Typically, aluminum checker plates require bending processing, and cracking must be avoided during this bending operation. Therefore, attention should be paid to the selection of appropriate materials and processing methods to ensure the desired mechanical properties and durability of patterned aluminum plates.
