Small 5 bars aluminum chequered plate Vs big 5 bars aluminum chequered plate
The 5-bar aluminum checker plate, also known as aluminum tread sheet plate, anti-slip aluminum plate, aluminum checkered plate, aluminum checker plate, patterned aluminum plate, or aluminum textured plate, boasts excellent anti-slip properties. It finds widespread use in construction, flooring, platforms, and design applications. The distinctive pattern on its surface consists of five parallel concave and convex patterns, each angled at 60-80 degrees with respect to the others, contributing to its outstanding anti-skid characteristics. The 5-bar aluminum tread plate comes in two varieties: small and large. The difference lies in the length of the bars, with the small pattern featuring bars approximately 30mm long and the large pattern featuring bars around 40mm long.
The primary products of 5-bar aluminum chequered plates include those in the 1 series (1060), 3 series (3003), and 5 series (5052 and 5083). The 1060 aluminum chequered plate is an ordinary alloy pattern plate commonly used in normal environments due to its affordability. It finds applications in cold storage, flooring, and outer packaging. On the other hand, the 3003 aluminum chequered plate is a manganese alloy pattern plate offering higher strength and good anti-rust properties. It is typically used in situations where rust prevention requirements are not overly strict, such as truck beds and cold storage floors. Meanwhile, the 5083 and 5052 aluminum chequered plates are magnesium alloy pattern plates. These plates exhibit greater hardness, corrosion resistance, and anti-rust capabilities compared to the aforementioned plates. They are commonly employed in humid environments like ships and carriage decks, offering high hardness and a certain load-bearing capacity.
Specification of small 5 bars aluminum chequered plate Vs big 5 bars aluminum chequered plate
Alloy | 1 Series | 1060 aluminum chequered plate |
3 Series | 3003 aluminum chequered plate | |
5 Series | 5052 & 5083 aluminum chequered plate | |
Temper | O, H12, H14, H16, H18, H22, H24, H26, H32, H34, H36, H38, H111, H112, H114 | |
Thickness (mm) | 0.8-8.0 | |
Width (mm) | 800-2500 | |
Length (mm) | C | |
Surface | Bright finish, Mill finish | |
Bar difference | 1 bar (Diamond/Pointer), 2 bar, 3 bar, big/small 5 bar | |
Standard product | EN-1386,ASTM,GBT,JIS | |
Package | Export standard | |
Sample | Free |