3104 5052 5182 Aluminum Coil for Beverage Can End Tab

What alloys are there for aluminum beverage cans?

The types of alloys generally used in the production of aluminum cans include 3104 alloy, 3105 alloy, 5052 alloy, 5182 alloy, etc.

The main materials of aluminum coils for beverage cans include 5182 alloy coils for pull rings, 3104 coils for can bodies, and 5052 5182 alloy coils for can lids.

Specification Parameters Of Aluminum Sheet/Coil For Cans

5182 H19 H48 H49 Aluminum coils for ring-pull or Tab

5182 alloy coil is used to produce ring-pull or tab on beverage cans. These parts are essential for opening and closing the can easily. The strength and durability of 5182 alloy ensures that the pull tab can withstand repeated use without failure.

• Thickness: 0.279mm 0.287mm 0.292mm MAX 0.45mm (+/-0.003mm)

• Width: Made according to customer order (+1.5mm--0mm)

• UTS (MPa): 330-365

• TYS (MPa): 380-420

• Coating: PPG, Akzo, Valspar

• Standards: EN 541 and EN 573-3

• Roll weight: 2500kgs-3500kgs per roll

5052 5182 H19 H48 H49 Aluminum coils for aluminum end

5052 and 5182 alloy coils, under different tempering conditions, are used to make the ends of beverage cans. These ends are stamped and formed into the necessary shape and size to securely seal the can, protect the contents and preserve freshness.

5182 H48 aluminum alloy is stronger than 5052 H48, so 5182 H48 is mostly used for beverage lids with internal pressure, while 5052 H48 is used for beverage and food lids without internal pressure.

• Thickness: 0.208mm 0.216mm 0.224mm 0.249mm Maximum thickness 0.3mm (+/-0.003mm)

• Width: Made according to customer order (processed by slitting device) (+1.5mm--0mm)

• UTS (MPa): 330-365

• TYS (MPa): 380-420

• Coating: PPG, Akzo, Valspar, inner coating is 12-13um EPOXY, outer coating is 4-5um EPOXY.

• Roughness: 35-50um

• Standards: EN 541 and EN 573-3

• Roll weight: 2500kgs-3500kgs per roll

• The surface is treated with electrostatic spray wax