3003 mill finish aluminum coils
3003 mill finish aluminum coils desccription
Alloy:3003aluminum coil.
Temper: O,H14,H16,H18,H22,H24,H26,H28
Thickness:0.2mm-8.0mm
Width:600mm-2000mm
Surface:mill finished or plain
ID:508mm
Packaging and delivery: 1.wooden pallets and lashed by steel strips,2. shipped by 20 feet container or 40 feet container,3.Eye to sky or eye to wall,4.or it can be customized by customers 5. The fastest shipment,6. protective fil can be added
3003 aluminum coils featurer and application
3003 aluminum is a commercially pure aluminium which boasts excellent mechanical properties and is a widely used aluminium throughont industry.3003 is AL-Mn alloy, it is the most widely used as a rust-proof aluminum, the strength of this alloy is not high (aluminium sheet 3003), heat treatment can not strengthen, so the use of cold working methods to improve its mechanical properties: in the annealed condition has a high plasticity, when the plastic is still good half-cold hardening, work hardening when plastic is low, good corrosion resistance, good weldability, machinability bad. Mainly used for high plasticity and good weldability, working in a liquid or gaseous medium low load parts, such as mailboxes, gasoline or oil conduit, a variety of liquid containers and other deep drawing making small load parts: wire used to make rivets.
Typically, Alloy 3003 is used in a number of industiries. For instance, in the building products the alloy is used for roofing, siding, acoustic ceilings and corrugated sheets. In the chemical and food industries,like the cooking & kitchen equipment,food equipment. Alloy 3003 can be found in storage tanks, pipes, jacketing, metal work equipment for HVAC and aluminum duct work. Some typical applications include heat exchangers, air condition evaporators, motor vehicle radiators and freezer linings, just to name a few.
3003 aluminum coils chemical composition
Grade | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Al |
3003 | 0.600 | 0.700 | 0.05-0.2 | 1.0-1.5 | – | – | – | 0.100 | remains |
3003 aluminum coils mechanical properties
Temper | Thickness(mm) | Tensile strength(Mpa) | Yield strength (Mpa) | Elongation min (%) |
O(Soft)/ H 111 | 0.2-0.5 | 95-140 | 35 | 15 |
0.5-1.5 | 17 | |||
1.5-3.0 | 20 | |||
3.0-6.0 | 23 | |||
6.0-12.5 | 24 | |||
12.5-50 | ||||
H 12 | 0.2-0.5 | 120-160 | 90 | 3 |
0.5-1.5 | 4 | |||
1.5-3.0 | 5 | |||
3.0-6.0 | 6 | |||
H 14 | 0.2-0.5 | 145-195 | 125 | 2 |
0.5-1.5 | 2 | |||
1.5-3.0 | 3 | |||
3.0-6.0 | 4 | |||
H 16 | 0.2-0.5 | 170-210 | 150 | 2 |
0.5-1.5 | 2 | |||
1.5-4.0 | 2 | |||
H 18 | 0.2-0.5 | 190 | 170 | 1 |
0.5-1.5 | 2 | |||
1.5-4.0 | 2 | |||
H 19 | 0.2-0.5 | 210 | 180 | 1 |
0.5-1.5 | 2 | |||
1.5-4.0 | 2 | |||
H 22 | 0.2-0.5 | 120-160 | 90 | 6 |
0.5-1.5 | 7 | |||
1.5-3.0 | 8 | |||
3.0-6.0 | 9 | |||
H 24 | 0.2-0.5 | 145-195 | 115 | 4 |
0.5-1.5 | 4 | |||
1.5-3.0 | 5 | |||
3.0-6.0 | 6 | |||
H 26 | 0.2-0.5 | 170-210 | 140 | 2 |
0.5-1.5 | 3 | |||
1.5-4.0 | 3 | |||
H 28 | 0.2-0.5 | 190 | 160 | 2 |
0.5-1.5 | 2 | |||
1.5-4.0 | 3 | |||
H 112 | 6.0-12.5 | 115 | 70 | 10 |
12.5-80 | 100 | 40 | ||
F | 2.5-80 | 95 |
