Know more about beverage cans with 3104 h19 Aluminum Plate Sheet
3104 H19 is a non-heat treatable aluminum alloy suitable for chemical and food contact applications, common ones such as beverage cans.
3104 H19 Aluminum refers to the 3104 alloy in the H19 temper. H19 is a strain hardening temper, which means the aluminum has been subjected to a cold working process to increase its strength.
3104-H19 Aluminum is 3104 aluminum in H19 condition. To achieve this temper, the metal is strain hardened to a strength that exceeds H18 by at least 10 MPa (or 1.5 ksi). It has the highest strength compared to other variants of 3104 aluminum.
3104 h19 Aluminum Plate Features
Strength: 3104 H19 aluminum has higher strength than its annealed counterparts, such as H14 or H24 tempered conditions.
Formability: Despite the strain hardening process, it maintains good formability, allowing various forming and manufacturing processes.
Corrosion resistance: 3104 aluminum alloy, including H19 state, has excellent corrosion resistance and is suitable for outdoor applications.
Surface Finish: The H19 temper generally has a bright, smooth surface finish.
3104 H19 Aluminum Plate Sheet Specifications
Width: The width of the 3104 H19 aluminum plate may vary by manufacturer and application requirements. Common widths range from 1000 mm to 2000 mm (39.37 inches to 78.74 inches) and wider.
Length: Similar to width, the 3104 H19 aluminum plate can vary in length. Typical lengths range from 2000 mm to 6000 mm (78.74 inches to 236.22 inches) or can be customized to meet specific project needs.
Typical Sizes: Commonly used 3104 H19 aluminum plate sizes are 4ft x 8ft (1219mm x 2438mm) and 4ft x 10ft (1219mm x 3048mm). However, other sizes are also available, depending on the manufacturer.
Common Thicknesses: Common thicknesses for 3104 H19 aluminum plate range from 1.0mm (0.039 inches) to 6.35mm (0.25 inches). However, thicker sheets can be produced upon specific request.
3104 H19 Aluminum Plate Sheet Mechanical Properties
Tensile Strength: 290 MPa - 330 MPa (42, 000 psi - 48, 000 psi)
Yield Strength: 230 MPa - 280 MPa (33, 000 psi - 40, 000 psi)
Elongation: 2% - 5%
Hardness (Brinell): 70 - 90 HB
It should be noted that the specific dimensions, dimensions, and mechanical properties of the 3104 H19 aluminum sheet will vary slightly depending on the manufacturer and the specific production process. Therefore, it is advisable to consult the manufacturer or supplier regarding the specifications of the 3104 H19 aluminum sheet required for your application.
Aluminum 3104 h19 Applications
Beverage cans: 3104 H19 aluminum is often used in the production of beverage cans, especially cans. The H19 condition provides the necessary strength and formability for efficient filling operations.
Packaging: This tempered state of 3104 aluminum is also used in other packaging applications such as aerosol cans, food containers, and cosmetic packaging.
Roof and Siding: Due to its increased strength, the 3104 H19 Aluminum plate can be used in roofing and siding applications, providing a durable and corrosion-resistant solution.
Heat Exchangers: The combination of strength and formability makes 3104 H19 suitable for use in heat exchanger components where efficient heat transfer is critical.
Can Lid (Bottom) Material 3104-H19 Aluminum Plate
With the increase in personalized demand in the market, there is also an increasing demand for can packaging. The more commonly used can lid material is the 3104-H19 aluminum plate.
Status: h19
Thickness: 0.208-0.360mm
Width: 800-1730mm
Performance: excellent corrosion resistance, lightweight, high cleanliness, energy saving and environmental protection, high recycling rate.
