Indonesia 2mm 5052H32 aluminum sheet
5052H32 aluminum plate is an aluminum alloy with medium strength and good formability, which is widely used in many industries.
Indonesia 5052H32 aluminum plate is an aluminum alloy with medium strength and good formability. A careful observation will find that 5052H32 aluminum plate is everywhere, whether it is the petrochemical industry, construction industry, transportation industry or electronic and electrical industry.
The tensile strength of Indonesia 5052H32 aluminum plate is between 210-260MPA, the yield strength is about 130MPA, the elongation varies from about 5% to 12% depending on the thickness, and the Brinell hardness is between 55 and 65. Its production process includes: melting - casting - milling - sawing - milling - soaking - hot rolling - cold rolling - re-coiling and trimming + cleaning - intermediate annealing - cold rolling - stabilization annealing - stretching and bending - packaging and delivery.
The specifications of Indonesia 5052H32 aluminum plates are usually 1/2/3/4/5/6*1220*2440 (mm), and customers generally use them for stamping parts after purchasing. Generally speaking, if it is the above conventional specifications, 2 tons can be shipped, if it is a special specification, 8 tons are required for the minimum order. In addition, aluminum plates with a width of up to 2650mm can now be produced. It is one of the few manufacturers in the industry that can produce ultra-wide aluminum plates. If customers need to purchase ultra-wide 5052H32 aluminum plates above 2000mm, 15 tons are required for the minimum order.
With good performance and affordable price, Indonesia 5052H32 aluminum plate is highly favored in the market. 5052H32 aluminum plate has good hot process plasticity. The forging and die forging temperature is 420-475°C, and the thermal deformation rate is 80% within this temperature range. Its cold stamping performance is related to the alloy state. The cold stamping performance in the annealed (O) state is good, followed by the H32 and H34 states, and not good in the H36/H38 state.
The alloy has good gas welding, arc welding, resistance welding, spot welding, and seam welding performance, and has a tendency to crystallize cracks during argon arc welding. The brazing performance is good, while the soft soldering performance is poor. The strength and plasticity of the weld are high, and the weld strength reaches 90%-95% of the strength of the base metal. However, the air tightness of the weld is not high. It is recommended to use 5A03 alloy as solder to improve its air tightness and eliminate the tendency to crack.
The alloy has poor cutting performance in the annealed state, but improves in the cold hardened state.
5052H32 aluminum plate is mainly suitable for occasions that require high plasticity and good weldability. It is commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets, rivets, hardware products and electrical housings. In addition, it can also be used to manufacture aircraft fuel tanks, oil pipes, and aerospace aluminum alloy materials. It is a typical rust-proof alloy material.
