Reliable 5052 aluminum sheet manufacturer in South Korea

Publish Time: 2025-01-13 14:41:36Visit: 47238

The 5052 aluminum sheet plate is categorized under the 5-series alloy family, with magnesium and silicon as its primary alloying constituents. It boasts moderate strength, exceptional corrosion resistance, weldability, and a commendable oxidation resistance. This aluminum sheet finds extensive application in industrial structural components that demand certain strength levels and high corrosion resistance, encompassing the fabrication of trucks, tower structures, vessels, trams, and railway cars. Alternatively, 5052 aluminum plate is also known as ALMG2.5, indicating approximately 2.5% magnesium content (ranging from 2.2-2.6%), coupled with a low density of 2.68, high strength, and robust machinability. It stands as an outstanding material suited for bending, stamping, stretching, and other fabrication processes. Depending on various annealing durations and techniques, the temper of 5052 aluminum plate can be diversified into multiple categories, each exhibiting distinct hardness and machinability characteristics.

5052 aluminum sheet plate manufacturer

The 5052 aluminum sheet and plate is a widely recognized corrosion-resistant aluminum alloy. Depending on its specifications, it is categorized into thin, medium-to-thick, and thick plates. Regularly utilized tempers encompass: 5052-O, 5052-H112, 5052-H32, and 5052-H34 aluminum plates. The processing capabilities extend to thicknesses of 0.2mm to 600mm, allowing for customization tailored to customer requirements. Throughout the year, we Gwangyang Aluminum maintain an extensive stock of sizes ranging from 0.2mm to 6.0mm, including dimensions like 1250*2500mm. Should you require any, kindly reach out to our aluminum sales specialists without hesitation.

5052-H32 aluminum sheet plate

5052-H32 aluminum plate is the most commonly used temper of this alloy, with high fatigue strength, good cold workability, high plasticity, good weldability, good anodizing effect and corrosion resistance.

Performance of 5052 aluminum plate: The bending performance in the H32 temper is good, it can be bent at 90 degrees, the tensile strength is about 220mpa, the elongation can reach around 10%; it has good hardness and is suitable for bending, hardness is almost 3-4 times that of pure aluminum plate, and is used for hardware products with high requirements on hardness and strength. For 5052-H112 aluminum plate, the hardness can reach around 50-60HB, and has good lathe and milling machine processing performance; It is the first choice product in the mechanical parts processing industry, but the hardness will be lower than 6061 aluminum plate.

Application: vehicle skin, automobile engine outer panel, passenger car trunk panel, passenger car anti-skid decorative panel, automobile fuel tank aluminum plate, etc.

5052-O aluminum sheet plate

Compared with other tempers, 5052-O aluminum plate has softer hardness and higher elongation, so it is suitable for drawing processing; it is easy to stretch and oxidize, has high plasticity and corrosion resistance, cannot be strengthened by heat treatment. It has good plasticity during semi-cold work hardening and low plasticity when cold work hardening; good weldability; good anodizing effect.

Application: mechanical stamping parts, stretched aluminum plates, metal casings, auto parts, auto brake discs and dust covers, etc.

5052 h32 aluminum plate.jpg

5052-H34 aluminum sheet plate

5052-H34 aluminum plate is used for parts requiring good formability and corrosion resistance, high fatigue limit, good weldability, and medium static load. It cannot be strengthened by heat treatment. The chemical composition of 5052 alloy is similar to 5A02 alloy, and its properties are basically the same as 5A02. 5052-H34 aluminum sheet has high plasticity, low strength, good corrosion resistance and weldability, has poor machinability in the annealed state.

Application: automobile roofs, automobile fuel tank materials, automobile parts, etc.

5052-H24 aluminum sheet plate

5052-H24 aluminum plate has softer hardness and good weldability, is easy to stretch and oxidize, has high plasticity and corrosion resistance, cannot be strengthened by heat treatment. It has good plasticity during semi-cold work hardening and low plasticity during cold work hardening.

Application: Mainly used in oxidized materials, stamping parts, automotive aluminum plates, fuel tanks, electrical appliance casings, high-end decoration, etc.

Specification of 5052 aluminum sheet plate
Alloy	5052
Temper	F,O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38,H111,H112,H114,etc.
Thickness(mm)	1.0-600
Width(mm)	100-2650
Length(mm)	500-16000
Surface treatment	Rolled, patterned aluminum plate
Package	Export packaging (protective film, interleaved paper)
Certificate	CCS, DNV, ABS, BV
Application	Alumina plates, silos, automotive aluminum plates,molds, mask machines, electronic stamping parts, can lid materials, etc.
Sample	Available